 |
|
ULTIMATE WARNING LIGHT |
| Solid state, high
intensity, light emitting diode (LED) cluster designed to replace any existing warning or
rain light. The body is angled up 10º for better
visibility. Perfectly suited for use on your dashboard as an oil pressure light,
brake lights, or as a rain light mounted on the rear of a formula car. Comes with a
72" power lead and weatherproof SureSeal™ connectors for ease of removal for
gear changes and engine maintenance. Take care when mounting the
two ears on the body. The light's body has an o-ring
on the back to reduce vibration. Because of the
o-ring, the body does not sit directly against your
mounting bracket. By putting to much stress on these
ears, they will crack and break off. Shim with a
thin washer for many years of life. |
2.10"
diameter
|
|
L-5505
|
$49.95
|
The
body has two external mounting ears and a center
threaded insert in the rear.
The kit includes one light with waterproof
connector, mounting hardware, a template for
locating mounting holes and wire location, and instructions. |
|
|
|
"AFTERBURNER"
BRAKE AND RAIN LIGHT |
 |
| The ACT
Inc. Afterburner
features a rain and brake light, two separate
functions in the same package. This is a
three wire unit with wires for Brake, Rain and
battery negative. |
|
|
|
| The rain light can be
used in a stationary or a high flash rate mode. The Afterburner
uses low power, so minimal that you can power it from a single 9
volt battery. The light is waterproof and there is no
resistor to install or break.
The kit includes one light and
instructions for wiring for brake & rain light, brake or rain
light only.. |
|
Warning
Light Assemblies |
| L-41808 |
Clear
|
$7.85
|
| L-41802 |
Red
|
7.85
|
| L-41803 |
Amber
|
7.85
|
| L-41804 |
Green
|
7.85
|
| L-41805 |
Blue
|
7.85
|
|
Same design as on panels.
Fits into a ¾" hole.
|
|
