|
AUXILIARY
BATTERY QUICK DISCONNECT (175A) 21/4"
x 41/4" |
|
Use the auxiliary battery
connection to jump start your car rather than using the on board
battery. To assemble, crimp or use solder using a propane torch to
attach the wire into the terminal.
The 175A terminals are fit for
1/0 wire. Wire bushings are available to reduce the wire size to
#4. Slip and snap the terminal into the the connector. These
connectors cannot be connected in reverse polarity. Purchase one for
your car and one for your auxiliary battery. Use the connector cover
to deep dirt and debris out of the connector. |
|
Finally, do not let brake clean get
anywhere near these connectors!
The connectors will crack and fall
apart before your eyes! |
|
L-3028-S |
Set with Handle |
$29.99 |
|
L-3027 |
175A Connector With Terminals |
13.50 |
|
L-3029 |
Handle |
7.99 |
|
L-3030-4
|
Wire Reducer (from 1/0 to #4
Wire) |
2.39
|
|
L-3027C |
Red Connector Cover |
2.89
|
|
Auxillary
Battery Quick Disconnect (50A) 11/2" x
2" |
| This connector has
the same features as the 175A connector, but much smaller for
tight locations. Either size will effectively do the
same job for any type of car.
|
|
L-30255
|
50A Connector with Terminals |
$7.99
|
|
L-3025C |
Connector Cover |
2.89
|
