Aluminum
tank with a 1½" breather with washable element, drain, and a
3/8"NPT bung. Ideal for dry sumps and rear ends.
D-047-38
$79.95
DRY
SUMP BREATHER TANK
Designed to
allow venting of your dry sump tank while catching any oil that
blows out. It is a compact 3" x 3" x 6½" to
fit into tight places and has a ¾" NPT fitting for the vent
line. It has a drain valve so you can empty any oil that
collects in the tank.
Available with a roll bar mounting clamp or with a flat sheet metal
mount.
D-047-12402
1½ Tube Size
$74.95
D-047-12404
1¾ Tube Size
74.95
D-047-12410
Sheet Metal Mount
74.95
EXPANSION TANK
Helps to keep
you engine cool. A ¼" NPT fiting is welded in at the fop
for an air bleed line. A ½" NPT pipe fitting for a line
to the water pump is near the bottom. An ⅛"
fitting for water overflow is provided in the 6061-T6 billit
aluminum filler cap housing. Fabricated from 5052 aluminum.
D-047-45002
1½ Tube Size
$94.95
D-047-45004
1¾ Tube Size
94.95
D-047-45010
Sheet Metal Mount
94.95
VENT TANK
This baffled vent tank
is designed for catching oil blowing out of your transmission or
rear end vent line. Equipped with a filter to keep dirt out of
your lubricant an a ¼"NPT pipe threads at the bottom for your
vent line.