• Sold in Rear Vent Configuration
• Can be Easily Adapted to Top Air or Side Air Configuration
• Side Air and Top Air Kits Available (kit sold separately)
• Lightweight Composite Shell Technology
• Aggressive Styling
• Large Eyeport
• Recessed Face Piece for Seamless Radio Integration
• Available in White and Rubberized Matte Black
• 281/3MM SRV Shield (SRV-2 Pivot System)
• E-Max Plus Multi Density Liner
• Comfortable Standard Interior
• Pre-Drilled for Head & Neck Restraint Device
• Snell SA2010 Certification

Thanks to the versatility of the BR-1, racers no longer have to choose between a side forced air or top forced air model. By installing either the side (left) forced air or top forced air kit (BR-1 kits sold separately), the BR.1 becomes a full ventilation forced air helmet. By using the kit system, racers can easily switch the BR.1 to the desired configuration for their type of racing. The BR-1 incorporates 

Bell's air chamber technology to increase pressure and accelerate airlow (when used with an external forced air system) to maximize airflow for improved ventilation and comfort. 
Bell's 2011 forced air helmet features the new Quick Lock forced air nozzle that locks the forced air conector in place yet allows for easy release when its time to exit the vehicle. 
The smaller nozzle design helps accelerate airflow into the helmet. The Quick Lock nozzle can be used with traditional 1.5 inch diameter forced air hoses by using the following air adaptor kits that connect the hose with the Bell Quick Lock nozzle:

The BR-1 also features Bell's redesigned face piece with recessed areas that allow for seamless radio integration and easy installation. Racers can also customize the fit of the BR-1 by using Bell's Cheek Pad Inserts in 5mm, 10mm, 15mm and 20mm sizes to tighten the fit in the cheek area. 

The helmet is available in White and Rubberized Matte Black finish - the rubberized surface is more resistant to finger prints and smudges than traditional flat finishes. 

The BR-1 takes a 281 SRV Shield and each helmet comes with a clear shield and Bell visor strip as standard equipment. 

The BR.1 is pre-drilled for use with head and neck restraint devices.

The BR-1 can be adapted using the following kits:

$29.95

29.95

Side Forced Air:

$29.95

29.95

In addition, customers have the option of using a top or side forced air kit 
using the traditional round or standard barb nozzle.
The kits available using the round nozzle include:

$29.95

29.95

29.95

29.95