| 
     Use the auxiliary battery
    connection to jump start your car rather than using the on board
    battery.  To assemble, crimp or use solder using a propane torch to
    attach the wire into the terminal.  The 175A terminals are fit for 1/0
    wire.  Wire bushings are available to reduce the wire size to #4. 
    Slip and snap the terminal into the the connector.  These connectors
    cannot be connected in reverse polarity.  Purchase one for your car and
    one for your auxiliary battery.  Use the connector cover to deep dirt
    and debris out of the connector.  Finally, do not let brake clean get
    anywhere near these connectors!  The connectors will crack and fall
    apart before your eyes!  |