 |
BRASS FLOAT LEVEL ADJUSTMENT |
 |
It is essential that the following directions
be complied with in order to obtain correct leveling of the float:
The float level, expressed in millimeters, refers to the distance of the float from the
face of the carburetor cover when the top is held vertical with the float pivot at the top
and the float tab resting against, but not compressing, the spring-loaded ball in the
needle valve.
To adjust the float level, the tab should be carefully bent until the required dimension
is achieved. Float stroke is the dimension from the top cover to the bottom of the
float when the float is at the bottom of it's travel. Adjust this dimension by
bending the tab. |
Ford 1600 Oil Flow |
Ford 2000 Oil Flow |
|
 |
|
