 |
| ATF
(Automatic Transmission Fluid) is a full synthetic Dexron II, Mercon,
and Mercedes-Benz approved fluid. Superior stability allows
high |
| Quart
Price |
$8.50 |
| Case Price
12 qts. |
91.80 |
|
|
| temperature
operation without varnishing valves and clutches. Also
provides improved shifting in cold weather.
|
| D4 ATF
is a synthetic Dexron III and Mercon fluid meeting the requirements
of most transmission manufactures, while satisfying GL-4 gear
oil |
| Quart
Price |
$8.50 |
| Case Price
12 qts. |
91.80 |
|
|
| requirements.
Superior stability allows high temperature operation without
varnishing valves and clutches. Also provides tremendously
improved shifting in cold weather. The best low temperature
shiftability for manual transmissions and transaxles which require
ATF's.
|
| Power
Steering Fluid provides much improved wear protection and
resists thermal breakdown. Provides continued high pump output
at high |
| Quart
Price |
$8.50 |
| Case Price
12 qts. |
91.80 |
|
|
| temperatures
and resists evaporation and foaming at high temperatures.
|
| Friction
Modifier is a friction modifier designed to reduce limited-slip
noise and to aid the proper break-in of any differential. This can
be added to |
|
| any
gear oil to reduce temperature during break-in and prevent gear
softening. Replaces manufacturers' limited-slip additives. Can be
used to perfectly tune a limited-slip unit. Red Line 75W90 and
80W140 Gear Oils already contain this additive.
|
| Assembly
Lube provides three-times greater film-strength than
conventional black |
|
| Molybdenum
Disulfide greases and will not clog oil filters. This product clings
to all surfaces and is an excellent rust inhibitor, allowing the
storage of parts for years. A thin film of protection is all that is
required an mating parts.
|
| Water
Wetter® Supercoolant is a unique wetting agent for cooling
systems which reduces coolant temperatures by as much as 30°F. This
liquid |
| 12 oz
Bottle Price |
$8.50 |
| Case of 12
Price |
91.80 |
|
|
| product
can be used to provide rust and corrosion protection in plain water
for racing engines, which provides much better heat transfer
properties than glycol-based antifreeze. Or it can be added to new
or used antifreeze to improve the heat transfer of ethylene and
propylene glycol systems. Designed for modern aluminum, cast iron,
copper, brass, and bronze systems.
|
|
SI-1 Complete Fuel
System Cleaner is a concentrated package of the most powerful
high-temperature detergents available to clean |
| 12 oz
Bottle Price |
$6.50 |
| Case of 12
Price |
70.20 |
|
|
| gasoline
fuel injectors and intake valves. Complete Fuel System Cleaner can
clean injectors to nearly 100% efficiency in one treatment. The
cleansing effect on injector deposits can raise fuel economy
approximately 12% or even greater, depending on the condition of
the injectors. Although many gasolines advertise injector
cleanliness, GM presented a paper to the SAE which indicates that
their customers encountered injector plugging with all major
brands of gasoline (SAE 861533). Complete Fuel System Cleaner
contains detergents and a synthetic upper cylinder lubricant which
will help clean the intake valves, pollution control valves,
combustion chamber deposits and carburetors. Complete Fuel System
Cleaner also protects the fuel system from rust. One bottle treats
up to 100 gallons. Safe for continual use.
|
| 85 Plus
is designed for use in all diesel engines. Contains extremely
powerful lubricants, detergents, seal conditioners, fuel
stabilizers, |
| 12 oz
Bottle Price |
$6.50 |
| Case of 12
Price |
70.20 |
|
|
| and rust
preventatives, but without smoke suppressant. Instead, Red Line 85
Plus contains additional cetane improvers which will boost the fuel
5-9 cetane numbers and additional lubricants which can reduce wear
in low-sulfur fuel by 75%. This improvement in lubricity and cetane
will reduce detonation, assist starting, help reduce smoking, help
prevent fuel system wear and leakage and can provide 5% additional
power and efficiency.
| Synthetic
Air Tool Oil, is an excellent lubricant for rotary and
piston type pneumatic tools. |
|
| Regular use
prevents wear and rust. The bottle cap features a flip-up nozzle
for easy use. |
|
| CV-2
Grease possesses a very high melting point, excellent water
washout resistance and superior antiwear which makes it excellent
for high-temperatures and extreme loads. CV-2 contains an organic
moly and is for wheel bearings, high-angle and conventional
CV-joints, |
| 14
oz Cartridge |
$9.50 |
| Case
of 6 Price |
51.30 |
| 14
oz Jars |
9.50 |
| Case
of 6 Price |
51.30 |
|
|
| chassis
lubrication and high-temperature, high-speed industrial equipment. |
| Next
| Back |
|
